Robot Controller Pairing

---

This manual is for teaching the pairing of the robot controller with the robo

Pairing Steps

Note

Pairing the remote control requires connecting to a terminal. ssh root@192.168.55.1 Debug wire have to connect DBG count and face A should be facing outwards

1. Terminal execute command crsf-app -bind ，will back：

   正在检查串口通讯状态...
   uart connect success
   正在进入配对模式...
   bind mode success
   请打开遥控器，左长按右侧按键进入`TOOLS -> ExpressLRS -> [Bind]`，手动搜索配对。
   

   

2. Power on the robot controller , Push the button on the right side to the left. Press the buttons in sequence to enter Tools -> ExpressLRS -> bind mode.

3. If success will back this massage :pair success。